You're currently viewing posts by Pinsider jjoravec.
Click here to go back to viewing the entire thread.
Anyone got the exact measurements for the Terminator 2 back glass and thickness. I picked up a machine that did not have it and need to buy one or get one made.
Thanks
Can anyone out there get me these backglass measurements?
Quoted from jjoravec:Anyone got the exact measurements for the Terminator 2 back glass and thickness. I picked up a machine that did not have it and need to buy one or get one made.
Thanks
I always like to make sure Thanks,
Quoted from TheOnlyest:Sorry dude, I assume, like me, everyone who saw this post assumed you'd figure this one out on your own with a simple tape measure... 27" x 18-7/8" x 1/8"
Quoted from loscanones:Cable management on the back of the main cabinet...more space, and no rubbing against PF - that was really annoying for me.
And...no more spaghetti under PF
What did you use for cable management?
In the process of restoring a T2 and trying to figure out where this connector goes and what it looks like.
Can someone post me a picture of this connector not cut? There is some black connector on the right of the photo I am not sure about as well.
Quoted from Schwaggs:All the yellow wires are the same and all the yellow w/white are the same. There are multiple wires of each color running back to the transformer to carry the load.
Got it, thanks
Quoted from jjoravec:Also looking for a.picture of this connector coming from the displays on the backbox panel. Someone hack this together and I want to fix it.
[quoted image][quoted image]
Can anyone help with with a picture of the connector coming of the backbox lights? Last thing I need to finish this restore.
Having an issue with my sound board. I put in new sound Roms that I burnt on to 27c010 chips according to the manual. When the game boots I get a message that U15 sound checksum is bad. I tried to burn another U15 and same result. I also tried another sound board and same message.
Anyone have an idea what is causing this? Is the 27c010 the right chip for U15?
Thanks
Quoted from Averell:Yesterday I have finished my custom made topper for the backbox.
[quoted image]
[quoted image]
[quoted image]
[quoted image]
Cool
Can someone post a picture of how their start button is wired up? I have everything working but the start button. Even in switch test the button does not work.
Thanks
Quoted from eyeamred2u:Hope these help solve your issue.[quoted image][quoted image]
Yep, That got me past the start button problem
Thanks
I resolved my start button problem, which led me to hopefully my final issue. When I power on the game it blows the f105 fuse, which is for solenoids 1-8. If I unplugged connector J130, the fuse doesn't blow. I am assuming this means one of those solenoids are bad. I unplugged the knocker one so that eliminates it. I check the rest of the solenoids with my multi-meter and the ohms range for 2 -10.
I did notice non of the solenoids had diodes on then, Is there supposed to be?
Any ideas what the issue could be, before I disconnect each solenoid?
Thanks
Anyone know what triggers "Warning" or "Danger" to show up on DMD display. I think I got some wires crossed on my playfield swap this causing my tilt problems. Trying to track it down.
Thanks
Quoted from Manny65:"Warning" message is generated from the plumb bob (Switch 14) - White-Yellow & Green-Brown wires
Thanks, for some reason the switches by the left sling shot are triggering a "Tilt" so something on that row are messed up.
I have a T2 that keeps blowing fuse F114 when I power on. I have the WPC89 MPU unplugged. I have tried 3 different Driver boards and they all keep blowing Fuse f114 on the driver board when I power on.
Any thoughts on what this could be or where to begin? I looked at the Pin wiki page and tried some of their idea but it didnt help.
Thanks
You're currently viewing posts by Pinsider jjoravec.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/terminator-2-clubmembers-only?tu=jjoravec and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.