Hi all, picked up my game in December. It is a nice routed example with what appears to be day 1 mylar. I've put in the Cliffys, new Titan rubbers and Comet LEDs. Since the teardown and cleaning, the ball bounces out of the database scoop far more often than not. Any adjustments that I can make or do I just keep playing and the game will slow down a bit? I've read and enjoyed every post in this thread, thanks in advance for your attention.

I'll certainly take a look, thanks for the reply.

Have a new issue with my T2, the sound is going in and out. Sometimes the game boots fine, but it never gets through a full game with the sound correct. It will drop out or get stuck. Sometimes the noise the game makes when booting is normal and others it is super loud. I ordered new ribbon cables and installed, no change. I pulled the board and reseated the roms, no change. Any advice from the group, should I buy the sound board rebuild kit or just call it a day and send the board in for repair. Anyone have an educated guess which component or components cause this type of issue. Thanks in advance.

Will do.

I did swap boards, the problem is gone so the issue is on the sound board. Interestingly, the Black Rose board is much louder so I needed to change the minimum volume setting. I'll probably send the board out to be repaired, unless someone thinks they know what the issue is. I've done some board work, but as there are not replacements available having it professionally restored seems like a good decision.