Terminator 2: Judgment Day
Williams, 1991You're currently viewing posts by Pinsider MG7322.
Click here to go back to viewing the entire thread.
Quoted from Scoot:I have never seen a T2 that will reliably send the ball up to the top lanes. I have spent too much time on my own trying to adjust and still can only achieve maybe 3 out of 10. It's not a power problem. It is a geometry problem.
Mine gets it to the top every time. So it is possible to set it up to make the upper top lanes.
Quoted from mikespins:Averell released an update (L8.3) that can be downloaded here - https://www.ipdb.org/machine.cgi?id=2524 8.4 will be an update to 8.3
Installed and a great update to T2. Running with full Pinsound and profanity enabled. Was on the fence on Pinsound but a must for T2 and TSPP.
Anyone have a gun calibration procedure? My gun off slightly causing the ball not to roll into it (gets stuck on the wire form). Seems like it can’t find the home position all of a sudden. If it does the self calibration the game will play fine the rest of the night. Also before I do the self calibration during multi-ball it will just rotate back and forth and not go home. (Screwing up my multiball event of course)
Going to dig into this today. Thanks in advance for guidance.
Reporting back, those switches just needed some very fine tuning. Adjust and check, adjust and check. In summary look at those switches and understand how they work on test mode.
Easy to cut and modify for the pin, have to make a bracket underneath to bolt it up. Ran the OE wires to the eyes so they still light up. Fits good with no clearance issues if you make your hole right.
EC06211A-F04D-4D49-BB30-50299B88F9FA (resized).jpeg43FCCC10-8C45-4CC0-AC8C-1FD786F83C26 (resized).jpeg9234543B-CE3C-427F-B8AA-CCCE39B4DF09 (resized).jpeg45FDDC7D-5335-4192-8325-CBF0F79836F3 (resized).jpeg582A86D2-5470-4514-BB16-094DDE431369 (resized).jpegB69963FE-4CB6-4348-9870-7FF6FEDD6EAB (resized).jpeg212FB95E-3E8C-40E3-9089-41313CE6F41B (resized).jpegI went with T2 chrome edition side blades from retrorefurbs
https://www.retrorefurbs.com/shop/terminator-2-chrome-pinball-sideblades/
4E2F796B-B371-4213-961D-36298570EBCC (resized).jpegI’m all up to date on mine, newest Pinsound files to support L8.3. Also don’t forget to update colorDMD chroma.rom as well. (If you have one on your game)
Will do the same when 8.4 is released!
Right, I have a local guy who will burn me a chip for a cup-o-coffee in return for his services.. Just need to get access to the download.
Installed new rom with L8.4 over the weekend! All up to date. Thanks again for this excellent update.
Quoted from MStem80:I just joined the club, and wow this thread is long. I like to tinker and mod things, what are the most popular mods with this game? Also, I'm thinking about going pinsound with this, is there a pinsound going around that includes the soundtrack songs from Guns n Roses? Also, why is Robert Patrick not on the back glass, and has anyone remade the translight with his face on the right of Arnold?
[quoted image]
https://www.ipdb.org/machine.cgi?gid=2524
“Reportedly, due to pre-release secrecy around the Robert Patrick 'liquid metal' T-1000 character and the chance the game could be released prior to the film, the T-1000 character was not shown in the cabinet, playfield, and backglass artwork, with the exception of a small picture of actor Robert Patrick on a light shield. With the game still in development, by the time the DMD programming was finalizing (which happens after the artwork), the liquid T-1000 was already public knowledge, which allowed the character to be included in the display animation. When a player gets an extra ball, the DMD graphic stating to shoot again is a clip of the T-1000 opening a door and getting shot by Arnie with a shotgun.”
Quoted from docquest:Cab is almost ready for decals. I decided to add something different to the back of backbox. Found a cool image online then made a stencil using my cricut cutter. I can almost hear Arnold saying "I'm the back". [quoted image]
We gonna see this beauty at Pintastic in a few weeks?
You're currently viewing posts by Pinsider MG7322.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/terminator-2-clubmembers-only?tu=MG7322 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Cleveland, OH