Brought my T2 home today. Have been playing it this afternoon. Need to go through it later and sort out some lighting options. This thread has some killer examples of LED setups.
You're currently viewing posts by Pinsider Kronlar.
Click here to go back to viewing the entire thread.
After spending an evening playing it and reading through this club thread, I figured out that what I thought were decals on a dozen or so of the inserts is in fact lifted inserts. Lifted enough in spots that the ball travel will deflect if at slow speed.
Confiscated the wife's hair dryer at about midnight to test a repair on one of them. She was not keen on the banging for some reason...
Will begin repairs in earnest tonight to get those back to level with the PF and secured in position with some thin CA glue (superglue). Looks like all but one should go back pretty much level with no loss of clear around them.
Any other words of wisdom derived in the last 3 years since this thread was active?https://pinside.com/pinball/forum/topic/replacing-insert-decals
The other interesting thing I've found is how badly the bottoms of the inserts can be clouded up from bar smoke. This unit came out of a pool hall. Cleaning bottoms of inserts with windex and qtips has made a huge difference in visible light from the inserts.
You're currently viewing posts by Pinsider Kronlar.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/terminator-2-clubmembers-only?tu=Kronlar and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.