i got to have a set of those slings! they're much better than stock imo. How much and how do you order? I went to their website but there is no order form?
i got to have a set of those slings! they're much better than stock imo. How much and how do you order? I went to their website but there is no order form?
Quoted from shacklersrevenge:i got to have a set of those slings! they're much better than stock imo. How much and how do you order? I went to their website but there is no order form?
paypal goes to
Send Caty an email to [email protected] and they will send you the invoice number to reference.
Quoted from JDub1006:paypal goes to
[email protected]
Send Caty an email to [email protected] and they will send you the invoice number to reference.
Thanks JDub!
I've been wanting to order their Ball Guides (My red plastic ones are getting destroyed) but was racking my brain trying to buy them. There site needs to be clearer on how to order. I emailed info@pinball-dreams many times, but got no reply. Hopefully Caty's email works betters.
99% chance yes. Unless someone put a re-imort door on your machine. Sure way to know is look inside, there should be evidence at the transformer clips/line cord of a convert. Not a big deal if the game looks and plays good
So I just got a replacement skull and honestly I think it looks like shit compared to the original which is all busted up even. All of the definition lines are drawn on with marker. Is this normal for the repros?
Quoted from Deadpool66:So I just got a replacement skull and honestly I think it looks like shit compared to the original which is all busted up even. All of the definition lines are drawn on with marker. Is this normal for the repros?
I have a repro hunter/killer ship and it's the same way.
So I just got a replacement skull and honestly I think it looks like shit compared to the original which is all busted up even. All of the definition lines are drawn on with marker. Is this normal for the repros?
Same here. I was really upset when I bought this one....I installed my old crack one and sent it back....my son could have filled in this better!
Quoted from NinJaBooT:Something the conception of this club inspired me to add to my collection. I just bought this for $500.
Ninjaboot, is that the one that was on ebay from BC?
Let me know when you tire of it.
Hey everyone who PM'd me about T-1000 mods (and there were a lot of you!!)
I thank you for your interest.. PLEASE be patient, these things take forever to paint and I'm backed up to my ying-yang in other orders at the moment. If you're desperate, contact Borygard.. he has two left. Otherwise, give me a couple of weeks.
OR, if you want a chrome one.. well they're super easy to paint.
- B
Quoted from pinball_customs:Hey everyone who PM'd me about T-1000 mods (and there were a lot of you!!)
I thank you for your interest.. PLEASE be patient, these things take forever to paint and I'm backed up to my ying-yang in other orders at the moment. If you're desperate, contact Borygard.. he has two left. Otherwise, give me a couple of weeks.
OR, if you want a chrome one.. well they're super easy to paint.
- B
Cant wait!
Quoted from mik71:Hey, just found this. Can I join? Have a T2 in the process of modding and all.
But first there is the matter of your registration fee:
Log into PayPal and send $399 plus $9.99 processing fee to Old_Hutch_needs_bucks@for_pins.net
Quoted from mik71:Ninjaboot, is that the one that was on ebay from BC?
Let me know when you tire of it.
Got it Calgary. Havnt picked it up yet. Welcome to the club.
Quoted from Old_Hutch:But first there is the matter of your registration fee:
Log into PayPal and send $399 plus $9.99 processing fee to Old_Hutch_needs_bucks@for_pins.net
There is a processing fee?!?!? What a ripoff!
Quoted from JDub1006:Same here. I was really upset when I bought this one....I installed my old crack one and sent it back....my son could have filled in this better!
That looks like ASS, where are you guys getting these from?
Got mine from bay area amusements because they had the plastics that go around the skull. I didn't know there were two versions I'm sending it back not worth 50 dollars IMHO when the one from Marco looks nos for 5 more dollars.
Caty got a hold of me! Good news!
Still trying to figure out if the Slingshot foil is red or blue. Their site says red, but everyone on here with the mod has blue foil (similar to the ball guides mod).
There is another forum topic out there on the 10/25 release of new ColorDMD displays. I suggested in the forum that T2 would be an awesome candidate for this. That idea was attacked! Apparently, us T2 owners are "Too Cheap" to pay for such an expensive mod. If any of you guys feel the same as me, I could use a little "Ammo" in that forum topic!!!
Has anyone done the El Wire mod to this game? I have the wire but the instructions were vague about the application. The instructions say to "be creative"...
Quoted from JDub1006:Same here. I was really upset when I bought this one....I installed my old crack one and sent it back....my son could have filled in this better!
Where did you get that from, that looks terrible! I recently got one from Mad-Amusements and it looked Great!
Quoted from pinball_customs:Hey everyone who PM'd me about T-1000 mods (and there were a lot of you!!)
I thank you for your interest.. PLEASE be patient, these things take forever to paint and I'm backed up to my ying-yang in other orders at the moment. If you're desperate, contact Borygard.. he has two left. Otherwise, give me a couple of weeks.
OR, if you want a chrome one.. well they're super easy to paint.
- B
Chrome for me!!! Thanks for doing the mod!
Quoted from ralphwiggum:Where did you get that from, that looks terrible! I recently got one from Mad-Amusements and it looked Great!
I bought mine from the pinballcenter. Now I know why it was $20
Quoted from Deadpool66:I would buy a color DMD in a heart beat.
I bought the red DMD plastic from pinbits. I like the red look instead of the orange.
Quoted from Old_Hutch:But first there is the matter of your registration fee:
Log into PayPal and send $399 plus $9.99 processing fee to Old_Hutch_needs_bucks@for_pins.net
Money sent, don't spent it all in one place.
Quoted from Napabar:Caty got a hold of me! Good news!
Still trying to figure out if the Slingshot foil is red or blue. Their site says red, but everyone on here with the mod has blue foil (similar to the ball guides mod).
Mine is en route but I didn't ask about the colour. I'll let you know when it arrives
Quoted from JDub1006:I bought the red DMD plastic from pinbits. I like the red look instead of the orange.
Looks really good! Fits the theme better than the orange.
Quoted from shacklersrevenge:does anyone know where I can find the square left ramp plastic that goes over the metal ramp (image of the T2 head) and a right plastic hand for above the right slingshot?
My hand is busted to I have yet to see the skull above the ramp or hands for sale.
Loving this thread, but sadly tonight is my last night in the Terminator 2 club. It was my first DMD game and a favorite from back in the day, but I have to see what else is out there...Arnold is moving on, and he is being replaced but someone not nearly as macho lol. It is an awesome game and is really the first pin that grabbed me when I was strictly a video game dude. Hasta la Vista Baby!
Quoted from JDub1006:I bought the red DMD plastic from pinbits. I like the red look instead of the orange.
The color DMD I'm referring too is a special, multi-colored LCD screen. It's not a monochrome replacement or filter cover.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/terminator-2-clubmembers-only/page/5 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.