So I still have no progress on the GI situation. It is an in line problem somewhere, because if I swap J120 and J121 I still get nothing on the lower half backbox GI. I’m new to digital multimeters, so need to figure that out.
Went hunting for other problems, only the right speaker is working. The left and cabinet speaker have nothing. I have two sets of wires, black and black/yellow, and they are in the right spots. Swapping those connectors (J504 and J505) doesn’t change the result. So need help there too.
Next, take a look at the pictures below on the skull assembly. The switch is hanging by a single screw, and the lever seems too short to make connection with ... I think the drop target? (It was too the right of the bottom of the assembly.) on top of that, I have a stray yellow/purple wire not connected to anything.
Any thoughts on the speaker or stray wire? And can I get a pic for what your switch looks like on the skull assembly?
518FCEC0-DC46-4850-A858-2C90605EE01E (resized).jpeg61FAA83C-9C96-4ABB-9265-BCCDA5C114EC (resized).jpeg75A6313E-5A96-476B-A9BC-A80EDC689DCE (resized).jpegFC1D0931-82B6-448F-8D50-950C92E19C06 (resized).jpeg