I have replaced the 12 slot connector on my t2, but did not mark the order of the wires.
Can someone explain why some of the wires were looped into the connector twice and why one only went into it once?
For some reason I have all lights working except top row of backglass.

IMG_20140607_183854.jpg

I did not replace the pins, but I did have the top lights on the backglass on at one time. I'm thinking I just need them in the right order?

I replaced the connector because it was damaged. I did not attempt to replace the pins.
I would like to know if anyone knows how the wires are supposed to go into the connector. The picture above shows that I have all wires into the connector, everyone of the wires is getting power. If I detach one of them, an area of the play field or the back light will turn off. All lights work except the top lights (as shown in the pic).

IMG_20140607_205842.jpg

Thanks for the pic, thats what I needed. Turned out to be the first wire (the one on the top) was a little loose. A wiggle and the top lights came on.