You're currently viewing posts by Pinsider rydhia.
Click here to go back to viewing the entire thread.
Quoted from delt31:Nice! Where did you buy those?
eBay, search “ninja turtles mini 2003”
Looks like they’re drying up, here’s a link to an example: ebay.com link: TMNT MINI 2 25 Action Figure Teenage Mutant Ninja Turtles 2003 Lot Of 2
Anyone else’s left insert on the apron not lighting up? My + and - were mixed up and I had to re solder the two on the LED board. Not sure how you don’t notice that part is out during QC, then again, it took me over 24 hours to notice.
Quoted from gumnut01:Your third photo shows the top flipper as being slightly off parallel to the orbit. If you are having problems with the Lair shot, could you try adjusting the resting flipper position slightly upwards? Is there a flipper placement guide (hole in the playfield). I adjusted my JJP POTC top left flipper and it did make the Bayou hole underneath the flipper easier to hit. Trick is to just adjust slightly so not to change the shot trajectory too much. Just a thought, as I am reading many people complaining about this Lair shot.
Definitely a tough shot. I’ve been treating it like the camera shot on Twilight zone and can hit it about 2/5 times. Maybe I’ll mess with it, I just assumed it was supposed to be difficult.
Quoted from Yokimato:Looks great! Given the color coordination, the names "Leo", "Raph", etc. would be a cool option in place of "Ninja" and "Turtles" (Not sure what's on the upper left flipper)
I just went with a solid color.
66E7FFB6-BBD8-43B1-B897-1C67EAB5E3EC (resized).jpegQuoted from cleanandlevel:just got the LE!
how do you add co op? also, how do you reset the game I noticed you could do that as well?
Push and hold both flippers to change modes. To end the game with the start button and left flipper buttons, you have to turn the feature on, I believe it’s under standard adjustments.
Quoted from freddy:I think they don’t look so good!
And at $50 No thanks .
I’ll go with a different Flipper topper
You do you, it’s great to have options. People spray paint a $5 pencil sharpener and sell it for $50+, the pricing I have it at is what would make it worthwhile for me to make a set for someone who wants them in my free time.
Quoted from Daditude:They look pretty cool to me. What did you choose over them??
I use them, but these were for an order. My wife said their masks look too light compared to the ones on my machine, so I just redid the set.
Quoted from PinMonk:Or about $3.60 from the source (which is also likely unlicensed and where the ebay ones are coming from) if you can wait a month for it to show up.
https://www.aliexpress.com/item/4001095365324.html
I saw that and I’m pretty sure they’re not original, not like it matters much for a keychain. It’s branded “2015 Nickelodeon”, I think it ran me $6 on eBay.
Quoted from Waxx:I am not sure why so many people use keys for home use only pins.
I just like how it feels.
F0651999-060C-4ABB-B13E-F6D22021CF00.gifQuoted from cleanandlevel:yeah audio is bad. is the final battle mode supposed to end after phase 1?
When it goes dark, the shot you made up the left ramp is held by the diverter (at least on prem/LE) if you skip the cutscene, the ball still releases onto the left flipper and you’re playing in the dark for a few seconds.
Quoted from PinHead50:don’t see anything online to support that. Is that from a distributor? Seems a bit far fetched.
Yes it is.
edit: Got a call back stating it was an error. It's $599.99
A third update on the topper. Got another call stating Stern had them priced at $1000 and they have software for another mode like Jurassic Park.
Quoted from PinMonk:So it was $1000
Then corrected to $599
Now $1000 again?
Yep, just relayed the information as I received it.
You're currently viewing posts by Pinsider rydhia.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/teenage-mutant-ninja-turtles-club2020-cowabunga-its-pizza-time?tu=rydhia and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.