Quoted from Zenomorp:Well, add me to the list of people with Glider issues. One week old. Noticed this today. The glider is working. It moves left, right and center, but it’s ‘fidgeting.’ I’ve calibrated it twice and it’s still doing this. I’ve heard about Glider issues, but I’m not aware if this is one of them. What’s weird is that it’s working the way it’s supposed to with regards to diverting. It moves left, center, and right but fidgets around...but not in test mode. In test/calibration mode in doesn’t fidget at all but it doesn’t always move back to the same point. If I set the calibration for center at 188 and move it left or right, when it goes back to center it’s 190, or 191. Same for the other positions. There is a tiny 4-pin node board inside some heat shrink that the glider connects to. I’m wondering if that is the issue and sending errant voltage to the servo. Any ideas? It's working for the moment except for the fidgeting. I'm sure at some point the servo will die due to this.
We have the same issue with our glider fidgeting on the Premium. When we press the action button it moves to the left and doesn't wiggle, but when I press the action button to rotate it to the right it starts shaking again. Anybody have a fix? Afraid we will burn out the servos.