Woohoo, I'm in the club! I'm gonna search the rulesheet and finally play tonight! Tmnt was the first movie I saw in the cinema with my friends. In my childhood I always chose to be Michaelangelo on the playground... and now... finally... on the pinball machine! Cowabunga!

IMG_7099 (resized).jpg

Small warning (no problem!)

Ok it was late and I immediately paniced, but I'll just tell so you know it's nothing.
After unboxing,updated to code 1.1 immediately. I checked everything and before starting to play, I opened my door to put the settings, then suddenly several tech allerts appeared.
Node board 1 no communication, then node board 8, then node board 9...
Immediately took the glass out, checked all connections again, restored factory settings, I went completely nuts...
1 hour later, after I calmed down, I noticed there's the small button again next to the coin door that disables the 48v (they left it out on older spikes).
Pulled out the button and all errors immediately gone.
Just sharing coz when you're excited and unboxing, the easiest solution is not always what you think of first
Actually it would be better if it was in the code that these errors not appear when the buttons disables the 48v
When you're in the setup screen and you close and open the coin door again, these errors come and make you stressssss

HELP! My lights are switched... Is this a software bug? Or did they switch my wires???
The bebop and left outline lights are switched with the michaelangelo pizza parlor lights... running code 1.1. It’s very annoying in gameplay.
It’s in the game and also in the single led test you can see it’s wrong.

Can someone else test on their tmnt with software 1.1 please, before I do anything? Just to make sure it's not a software bug. Thx!

EDIT: found the solution, seems my boards got swapped in the production

connections (resized).jpg

Thx plasticbugs & Lermods. Seems like my boards got indeed swapped in production. Lights didn't respond with the number of the boards according to the manual, so I put them on the right place. Cables couldn't be swapped, coz they got different connections. Everything works as it should now. Cowabunga! We can play now

Yep, it doesn't say the error at boot, but still when you open coin door without pulling out the coin door button

We were playing 2 against 2 here but we would really like a cooperative mode 2vs2 so 2 people share progress vs 2 other people that share progress (instead of just sharing points)...