You're currently viewing posts by Pinsider garretswinning.
Click here to go back to viewing the entire thread.
Quoted from cleanandlevel:has anyone had any glider servo failures on their LE? we have a new glider assembly coming on Monday from Stern, but right now we're just wanting to try swapping out the servo and was wondering if anyone has done so with success.
tried the Zoskay DS3218 that had been linked earlier in the thread and it seemed to work at first when we tested it without being connected to the glider, but for some reason stopped when everything was assembled.
I have been having issues with the glider not moving fast enough to catch the ball coming from left ramp when needed to. I did a calibration before 1.1 code and it worked good for a bit then 1.1 came out and in settings it wouldnt allow to calibrate. Havent checked again since 1.1 came out.
Quoted from LapsedGamer:Can't you individually change the number for each position?
The previous code update i was able to calibrate each position of the glider but no longer will the game allow me to change them. When in settings if changing for example far left when enter is hit it goes to center calibration. Dont know if this is a LE issue or if others have this problem. Also just doubled checked and looks like we will be getting the technodrome topper for turtles!
20200830_083510 (resized).jpgQuoted from Happy81724:For Le folks, what speaker lights did you buy? I see there are a couple of options
Speakerlightkits.com you can go full grill or speaker only choice is yours. I really like them and was very happy with the outcome. I will prob get the speaker light only light also for a comparison. If you get the add on to go with music make sure your pizza disc is not grinding. The grind will throw it off going to the music and wont work properly.
Quoted from Pinball-NJA:How do I get one?
Quoted from acons017:I’m throwing money at my monitor but nothing is happening. How do I get one of these bad boys? So awesome!
look for the thread Nuclear Lit Cupholder here on pinside
Quoted from T-800:For those following, I have a little more information (and questions) regarding the glider function. Working through STERN after about a dozen emails finally suggested that my glider is bad and that I need a warranty replacement thru my distributor. If your glider is acting like how any of the others have described I'd recommend going thru your distributor right away and saving a week of wasted emails.
In any case, I received the .pdf for the glider replacement instructions. At the end there is a section for calibrating the glider. The instructions make it clear that the center position and the center position only is what gets calibrated. Even though the test menu goes through the other four locations, only the center is actually calibrated. If you're having issues with balls getting stuck one way or the other you can try biasing the glider to help. I've found this somewhat useful although my glider is still behaving with issues and doesn't travel far enough to the right (even with bias) to divert from a center ramp to the left flipper.
For those with a working glider mech, can you confirm this - - after playing through the different turtles, I've found on my game that only Michaelangelo and Leonardo can operate the glider IMMEDIATELY when the ball is launched. Hitting the glider button when playing Donatello and Raphael doesn't work right away and only seems to change the diverter after a period of time has gone by (or some sequence that I haven't yet caught on to). The turtles don't call out for different ways they affect the glider. Is this a bug in the code or am I just (un)lucky that for some reason those two turtles consistently behave in the same screwed up way?
so what about previous to code 1.21 when you could change the calibration. If that calibration number was changed to try to fix the problem and that was not it since now we cant get into calibration is what it was changed to now stuck at that set value?
Quoted from LowScores:Things all and all look about the same. Maybe swap or shorten a spring?
[quoted image]
[quoted image]
Getting the same thing but about 40% of the time the ball will not make it up the ramp. Maybe removing one of washers might be enough to make just enough contact.
20201101_152149 (resized).jpgQuoted from DVDA:i want this cup holder. where can I buy one?
Thanks for the interest. I am making them. They go along with the light show in the game. Dont have a video posted of the effects but will work on posting something. You can get on the list if you would like. Search nuclear lit cupholder.
Quoted from Mando:Has anyone with the new stern shooter rod been able to make it more reliable ? Seems it’s a hair too short and only makes it around the ramp half the time . I know others had the issue but I did not see a solution .
No solution yet here
You're currently viewing posts by Pinsider garretswinning.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/teenage-mutant-ninja-turtles-club2020-cowabunga-its-pizza-time?tu=garretswinning and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.