Quoted from ABE_FLIPS:

I'm having a hard time post passing from left to right and I saw that on alot of streams too. The problem is that there is also NO ramp feed from the left flipper to the right one. And there are often situation where you HAVE to shoot from the right flipper. Also if the center ramp is required and you have the ball on the left flipper, the ball feed from the right ramp is so fast that i can hit the center ramp maybe 1/10 from that feed... the right orbits post/plunger is closed alot of times too if I need the ball on the upper flipper. This in combination with those punishing targets and ramp post makes it very frustrating.
I repositioned the bottom post of the left sling shot because it has some play but it didn't help. Any ideas?

Quoted from TonLoc777:

Is that a custom paint job? Or did you order that armor kit separately? Looks great!

Quoted from robnotto:

What mods are you Putting on your Premium? I am putting in a shaker motor, HD glass, Lermods turtle shells, and side blades. I am thinking of getting the legs and armor power coated , but still up in the Air.

Quoted from spidey:

Go to mezelmods under TMNT and look at the ramp cover. It probably has to be that size. I just created a larger cover today because my smaller one would catch air balls on the end and get deflected back down the ramp. Balls that made it around registered 100% of the time.

Quoted from dinot:

I was having similar problems on my JP with fast shots. Fast orbit shots would not register but slow shots would. Apparently this is common on a couple of different optos on that machine. The consensus is that the fast shots get a little air and the ball breaks only the top half of the light beam. Top half of the beam still means that the beam was never broken.
The temp/perm fix was to put a piece of electrical tape on the bottom half of the opto opening. (In my case, the lane guide). There is a more permanent fix to raise the optos. This fixed my issue.

Quoted from Magadovski:

I lowred the upper left flipper strenght a little bit, and it helped for me.