Small warning (no problem!)
Ok it was late and I immediately paniced, but I'll just tell so you know it's nothing.
After unboxing,updated to code 1.1 immediately. I checked everything and before starting to play, I opened my door to put the settings, then suddenly several tech allerts appeared.
Node board 1 no communication, then node board 8, then node board 9...
Immediately took the glass out, checked all connections again, restored factory settings, I went completely nuts...
1 hour later, after I calmed down, I noticed there's the small button again next to the coin door that disables the 48v (they left it out on older spikes).
Pulled out the button and all errors immediately gone.
Just sharing coz when you're excited and unboxing, the easiest solution is not always what you think of first
Actually it would be better if it was in the code that these errors not appear when the buttons disables the 48v
When you're in the setup screen and you close and open the coin door again, these errors come and make you stressssss