Quoted from Walk:Thanks for the tip. I’m tried to push it up and down but I have no idea what I’m doing. Do I squeeze it together?
It’s a normally open leaf switch. The idea is, the button presses down on that white peg, forcing the large blade down, and making contact with the small blade underneath. This closes the switch/circuit. Your switch isn’t in proper adjustment, so when you press the button down, the two blades still don’t make contact. When adjusting a switch, almost always, the adjustment needs to be made on the small blade. So, you need to bend the smaller blade up a little. Not too much, you don’t want them always touching. Just when the button is pressed.
49073D52-9E5C-4160-960D-349B1B4A4121 (resized).jpeg