Demolition Man
Williams, 1994You're currently viewing posts by Pinsider JAG94.
Click here to go back to viewing the entire thread.
I just picked up a Demo Man and am having an issue with the display. I have tested the DMD itself, and it works no problem. When I turn the machine on it will make the sound as if it is booting, but will not allow a game to start. When I press exit on the coin door after start up it will go into attract mode, but still the display remains blank. Once I get to this point I can add credits, start a game, and it plays with no issues. Any help is greatly appreciated.
Quoted from PinsideTroll:have you tried pressing on the asic chip on mpu to make sure its seated?
Yes, it is seated. As of now the only thing that isn't working properly is the DMD, and as I mentioned before I did test it in another game. Ribbon cables also appear to be fine.
You're currently viewing posts by Pinsider JAG94.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tech-wpc-demolition-man-dmd-not-working?tu=JAG94 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Houston, TX