Games were going fine, then it just stopped detecting the ball in the vuk after a made garage shot.
I took the vuk off from the bottom and tested the switch. Unlike other switches it makes a sound in the switch test mode when it goes down AND comes up, other switches only make the "plink" sound when they go down. Solder points looked ok but I didn't do a super thorough examination all the way back. I bent the arm some and put it back, still acting kind of flaky.
Should I
1) Bend arm more
2) decide switch is probably fine and look for connectivity issues
3) Say F this and order a new vuk switch.
-ben