I recently set up my SC and ran into a problem that has me scratching my head. The ramp diverter when it fires is hitting the bottom of the ramp (design is it should be passing through a slot on the ramp). I'm not seeing a way to adjust it to elevate it any more. Has anyone experienced this and know to get it to sit a little higher so that it doesn't hit?

Thanks,

Pinball Jeff

#2 6 years ago

TSR

TaylorVA

Reese Rails

13y 116K 8,893 11 7

check the spring at 3 and shaft collar at 10

Screen Shot 2018-04-15 at 10.58.58 PM (resized).png

#3 6 years ago

JBL

PinballJeff

Pinside member

Byron Center, MI

11y 39,900 485 15

Thanks for the response. Are you thinking the spring is broken so less pushing up?

#4 6 years ago

TSR

TaylorVA

Reese Rails

13y 116K 8,893 11 7

OP
Quoted from PinballJeff:
Thanks for the response. Are you thinking the spring is broken so less pushing up?

I have had issues with that spring before.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/tech-safecracker and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.