Ripley's Believe It or Not!
Stern, 2004Today at the start of the regular multiball, my RBION started rapidly resetting.
Any of the 3 rollover switches in the lock lane will now cause a reset, regardless of game state.
I also noted that with the balls removed, the game consistently resets when it reaches "12" on the "locating balls" counter.
Someone suggested it could be low +5 volts at the dot matrix control board but I haven't been able to test that yet.
Thanks!
Quoted from Vanapult:Someone suggested it could be low +5 volts at the dot matrix control board but I haven't been able to test that yet.
Not at the "DMD control board", at the power driver board, where 5V for the entire game originates. There is a 5V and Ground test point, measure between those two test points.
--
Rob Anthony
Pinball Classics
http://LockWhenLit.com
Quality Board Work - In Home Service
borygard at gmail dot com
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tech-ripleys-reset-issue and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
St Louis, MO
Vancouver, BC