I'd do like a major shop job. Lots of pictures and notes. Remove the top side, then the bottom.
Reinstall the reverse, bottom side then top.
LTG : )™
You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
I'd do like a major shop job. Lots of pictures and notes. Remove the top side, then the bottom.
Reinstall the reverse, bottom side then top.
LTG : )™
Quoted from mof:I thought the more common advice is to remove part A from the old PF and then install part A on the new playfield right away?
If you have room and can do them side by side. Yes, by all means.
Not everybody has that and have to disassemble and reassemble whole playfields at different times.
Me, I just throw everything in a box. If can only go back together one way.
LTG : )™
You're currently viewing posts by Pinsider ltg.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tech-playfield-swap-advice?tu=ltg and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.