Try to be concise here. Rt flipper on metpro blew a fuse. Replaced with correct fuse and immediately blew again when machine turned on. When turning on flipper "ran itself" once while blowing that fuse. Replaced with WRONG fuse 7a vs 3a. (Oops) when turning on machine that time it fried the coil. Smoke. Odor. Etc. Coil sleeve nearly stuck but I can maneuver it out.
Bought new coil and fuses. Before I start replacing it all is there anything I should be checking before I turn games on so I don't smoke another coil?
Thanks