I am playing my whirlwind, and then all the sudden some switches stop registering. The switches that I found were the skyway switches, the spinner target, and a few of the directional targets do not work. If I turn it off, and come back to it, the switches work for a little bit, then they stop again. Where do I start?
Thanks
Quoted from the96stang:I am playing my Whirlwind, and then all the sudden some switches stop registering. The switches that I found were the skyway switches, the spinner target, and a few of the directional targets do not work. If I turn it off, and come back to it, the switches work for a little bit, then they stop again. Where do I start?
Thanks
The first thing to do is check the wiring to those switches and look for a loose wire or a switch that is being stuck in the activating position-locked on.Put the game in switch test and keep testing those switches over and over to see which one is being stuck.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tech-help-whirlwind and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Enfield, CT