The gray/yellow wire, witch comes from J141-2 should be 12v, and goes to both. The other wire for solenoid #39 is yellow/white and goes to J110-4, and for solenoid #40 it is green/white and goes to J110-5.
You're currently viewing posts by Pinsider wolf.
Click here to go back to viewing the entire thread.
The gray/yellow wire, witch comes from J141-2 should be 12v, and goes to both. The other wire for solenoid #39 is yellow/white and goes to J110-4, and for solenoid #40 it is green/white and goes to J110-5.
So is the yellow/white replaced by the green/brown, and green/white replaced by the tan/red? Do these wires go to the solenoids or come from J110-4 and J110-5?
You're currently viewing posts by Pinsider wolf.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tech-help-please-scared-stiff?tu=wolf and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.