(Topic ID: 62816)

tech help needed: WWFRR problem

By E_N_3

10 years ago



Topic Stats

You

Linked Games

#1 10 years ago

Just went to play a game of WWFRR, which was working fine yesterday, and it wouldn't opperate correctly.
It started-up like I could play a game, but the ball was never kicked over in to the shooter lane.
The flippers were also not flipping, and the lower slingshots also werent kicking.
I treid swapping out whatever fuses I thought it might be, but no luck.
I also tried pushing/reseating any harnesses/connectors I could see/find, but also no luck.
Any ideas?
Super appreciative for any/all help!
It might be a small thing I am over looking, as it is often the small things that can allude you, especially when you are frustrated!
--ED LI NY

#2 10 years ago

Do you have a manual ? find all the fuses you can. Pull and check them with a meter.

LTG : )

#3 10 years ago

yeah, have the manual,
http://mirror2.ipdb.org/files/2820/WWF_Royal_Rumble.pdf

i have pulled pretty much anything that makes sense, to me at least, and swapped in a new fuse. nothing

#4 10 years ago
Quoted from E_N_3:

i have pulled pretty much anything that makes sense, to me at least, and swapped in a new fuse. nothing

But the ones you pulled, were they bad ?
( I check new ones going in to )
Check for loose fuse holders too on the power supply board.

Next up check power outputs on power supply board.

LTG : )

#5 10 years ago

The ones I was pulling didn't seem bad, and when swapping in a replacement, it did nothing.
I checked all fuse holders, and all seem good.
Of course, my multi meter died, so I need to get a new one.
Does any one know if Home Depot sells a decent meter I can buy? I have a gift card and would love to be able to use the GC to buy the new meter!

#6 10 years ago

Must be day of dying data east my DMD just went out on Tmnt...sad day

#7 10 years ago
Quoted from Tsskinne:

Must be day of dying data east my DMD just went out on Tmnt...sad day

sad day indeed!
BTW - I LOVE the TMNT pin (and arcade games too)!

#8 10 years ago

Got my WWFRR working, thanks all!

3 years later
#9 7 years ago

So what was the fix?

Promoted items from Pinside Marketplace and Pinside Shops!
From: $ 9.99
From: $ 209.00
From: $ 110.00
Playfield - Other
Arcade Upkeep
 
$ 65.00
Boards
Pinball Haus
 
$ 16.00
Boards
Lermods
 
4,750
Machine - For Sale
Ogden, UT
$ 28.00
Electronics
Yorktown Arcade Supply
 
$ 35.00
Hardware
Filament Printing
 
$ 5.00
Playfield - Protection
UpKick Pinball
 
$ 20.00
Cabinet - Other
Filament Printing
 
From: $ 50.00
Cabinet - Armor And Blades
arcade-cabinets.com
 
$ 18.95
Eproms
Pinballrom
 
$ 36.95
Eproms
Pinballrom
 
From: $ 40.00
Lighting - Interactive
Professor Pinball
 
$ 18.95
$ 32.00
Electronics
Yorktown Arcade Supply
 
$ 18.95
Eproms
Pinballrom
 
$ 99.00
Cabinet - Toppers
Slipstream Mod Shop
 

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/tech-help-needed-wwfrr-problem and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.