Bally game show: ball drains then just sits for 10 seconds before it reads the drain. All switches work fine in switch tests.
Bally game show: ball drains then just sits for 10 seconds before it reads the drain. All switches work fine in switch tests.
trough switches still need adj. (or if really finicky replace them) ball isn't pushing 1 or more of them down far enough for switch to make full contact during play ....... I have seen this before on more than 1 system 11 game
next time it does it try lightly shaking/bumping the cabinet as soon as it does it & see if it registers more quickly
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tech-help-needed-bally-game-show and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.