If that's the post you pulled out, then that's how long it should be...
You're currently viewing posts by Pinsider jrrdw.
Click here to go back to viewing the entire thread.
How thick is the playfield? As best as I know those post are even with the bottom of the playfield when tight.
Quoted from LTG:Your first post said you know Pinball Life has it.
Get it there.
LTG : )
BONZI !!!!!!!!!!!!
Quoted from 3pinballs:they do, but only metric #8 or #10, no 8/32
#8 and #10 are numbers for machine screws. If it's metric it will have "MM" behind the number. Take your post to a hardware store and compair it to the #8, if I remember correctly that will be 8/32".
You're currently viewing posts by Pinsider jrrdw.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tech-help-medieval-madness-playfield-post?tu=jrrdw and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.