Hey guys,

I recently picked up a Rocky and Bullwinkle locally and need some assistance tracking down a GI issue.

I have GI lights on under the upper arch, slings, pop bumpers and outside edges of the playfield, but no lighting in the middle of the field or at the ball launch button.

I have lights in the backbox, so power is getting from the transformer to the supply board. The lights on/off relay is working during gameplay with the lit GI. I've taken a DMM and checked the GI connector on the power supply board and have 5.5-5.7 volts on all four pins. All fuses look good, have reseated all connectors.

I'm at a loss on where to go next. Any thoughts?

thanks,

rody