(Topic ID: 53836)

Tech Help: DE Rocky and Bullwinkle GI Issue


By Rody

6 years ago



Topic Stats

  • 1 post
  • 1 Pinsider participating
  • No one calls this topic a favorite

You

#1 6 years ago

Hey guys,

I recently picked up a Rocky and Bullwinkle locally and need some assistance tracking down a GI issue.

I have GI lights on under the upper arch, slings, pop bumpers and outside edges of the playfield, but no lighting in the middle of the field or at the ball launch button.

I have lights in the backbox, so power is getting from the transformer to the supply board. The lights on/off relay is working during gameplay with the lit GI. I've taken a DMM and checked the GI connector on the power supply board and have 5.5-5.7 volts on all four pins. All fuses look good, have reseated all connectors.

I'm at a loss on where to go next. Any thoughts?

thanks,

rody

Promoted items from the Pinside Marketplace
$ 30.00
Playfield - Other
Filament Printing
$ 14.50
Electronics
PinballElectronics.com
From: $ 16.95
From: $ 5.00
Cabinet - Other
Rock Custom Pinball
$ 14.95
Playfield - Toys/Add-ons
ULEKstore
From: $ 40.00
Lighting - Interactive
Professor Pinball
From: $ 369.95
Boards
PinSound
From: $ 9.99

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside