Having an issue on my Strikes N Spares where the machine is wanting to send the balls to the right flipper 90% of the time instead of them going to the left flipper 50% of the time. Is there a way to adjust the diverter?
Having an issue on my Strikes N Spares where the machine is wanting to send the balls to the right flipper 90% of the time instead of them going to the left flipper 50% of the time. Is there a way to adjust the diverter?
Been a while since I have tinkered since one of these, but I think you have optos that govern these. Chances are one opto thinks it is full OR the other thinks its not full. Going into switch test might be a good place to start. Cold solder joints on these are very common. Good luck. John
Awesome, thank you. I will take a look at it in the next few days and report back. Appreciate the help!
Figured it out. One of the coils had gotten a bit loose and wasn't properly firing through its bracket. Tightened it up, and it appears to be working properly now. I do appreciate the help!
This is a really fun and underrate game!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tech-gottlieb-strikes-and-spares-diverter-issue and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.