I don't have the manual for Big Hurt but if you lost three solenoids at once, and the fuses are all good, that tells me you likely have a wiring problem. Power is chained from one solenoid to the next. Start with the solenoid that is closest to the rear of the playfield that is not working. Check the wiring on the lug that has two wires and make sure the solder connection is secure.

viperrwk

Ya, it was really strange. Was working just fine then, bam, no more upkickers.

Just going to post here in case anybody ever has the same problem. It issue turned out to be the small board right next to the shooter lane that has the giant capacitor on it. The plug, while in the socket, wasn't pushed in all of the way. I guess when we were hooking everything back up we didn't get it secured and it vibrated out during play.

Now if we could figure out a few other little annoyances like the ball auto plunging on the first ball of a game, we will be set.