Game booted and display worked fine, shopped game and now when I turn on top display shows scrambled lines and it does not boot. When first turned on there are 4 ding, ding, ding,ding, then a dong. (If that makes sense). The 3 LEDs come on on the board and the middle one flashes continuously while the 2 on the end stay on. I did unplug the ribbon cable to the display from the board while cleaning. Where to start looking??? Thanks
It sounds like you have the cable on backwards. Double check that on both ends of the cable, the red stripe goes to pin 1.
Not sure. Would it hurt to flip cable around? Red stripe on board on left side and red stripe on display on left side?
Winner winner chicken dinner! Display working but saying adjustment failure. Went through the settings and seems to be working fine? Thank you, I will be able to sleep good tonight!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/taxi-will-not-bootdisplay-scrambled and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Bay Shore, NY