I purchased the new spin-out ramp in Blue and love the look. In regards to the play, I had similar issues with the new ramp as with my old ramp, only getting to 50K or 75K on a full plunge. After reading these posts, I played around with the orientation of the plunger, and that was the key for me. After getting the plunger more to the left and lower (in more of a centered position) I can now go all the way through the numbers and back again to 10, 25, and sometimes 50 K.
I was able to get the movement to the left by loosening the screws and re-positioning; to get it lower, I shimmed the shooter housing - see pics. The picture of the housing is a bit disorienting as it is shot from below.
WP_20150125_007.jpg WP_20150125_010.jpg