Just bought mine! It is in decent shape not perfect but definitely happy to have it. I have an issue with the right side GI since I got it home. looking for ideas on a bad connector or header that would kill the right side only.

Well I looked over the board you all had been talking about. I found the w2 resistor to be black burnt right up. Any idea on where to look for something to cause that. the joins on the pins and relay do not look as bad as I would have thought.

How many of you have had the plunger spinout fight. Mine will reach no higher the 75 on a perfect release. has the red spring, i am suspecting the cracked ramp and alignment now.

Yes red spring is the only one to use.

ok taxi owners, has anyone had issues with the catapult? I had mine on location and it blew q1 with the ball on the catapult. Q1 was melted right down. It was replaced but from what I know before I power it back up the catapult still did not fire. I am looking for the cause of the q1 before I go to far. board has burn from the q1 too. Any ideas will help alot.

Aux driver board q1 looks on my schematic to be on j1 pin 6 for solenoid 3. Am I missing something?

Replaced q28 q32 and q1 and she runs like a champ.