I am wanting to buy another Taxi for the 3rd time to keep that has a poor Marilyn translite.
What do cpr Taxi backglass owners think of think of them?

It might be the mylar glue residue.Use some goo gone and a plastic blade or towel to see if it will rub off.

Welcome to the hobby henhel!
Taxi is 1 of my favorites and is a great 1st pin to own.
Try repositioning the kicker arm by raising the playfield(remove the balls 1st) and loosen the 3 screws or slightly bend the arm a little.

On to of the left ramp.
1417301465842.jpg

Does anyone have a scan of the departure ramp decal that sits under the catapult wire ramp?
For some reason the new repro ramps don't include it.

Littleshopofgames has them

Here is the link:
http://ns8313.hostgator.com/~gameshop/product/taxi-triangle-ramp-decal/

Ask this guy on ebay if he has more.

ebay.com link: Williams TAXI Pinball Machine Carry Passengers Plastic

I think that is a Whirlwind decal

That would be a good mod though.

You may need to adjust the switch gate near the jackpot insert or the ball gate it activates isn't opening.
Here is a pic of both
The ball gate is behind the carry passengers target and has a spring attached that opens the flap 20150520_152018.jpg

What a beauty Libtech!

What yellow paint mixture did you use?

Unfortunately that protector isn't included.

It goes to the 906 Santa flasher.

20160917_073104-1 (resized).jpg

Remove the displays and see if all of the soldered feet are still intact on the glass.

Marco has them
http://www.marcospecialties.com/pinball-parts/01-8708

Planetary pinball has plastic sets and the Lola Marilyn plastic available if anyone needs them

Here is a pic

20150520_151946 (resized).jpg

Here is the spring used on ball gates:
https://www.pinballlife.com/index.php?p=product&id=3661

10-194 spring 2 1/8" long