(Topic ID: 75868)

Taxi Club... Members Only!

By mof

10 years ago


Topic Heartbeat

Topic Stats

You

Linked Games

  • Taxi Williams, 1988

Topic Gallery

View topic image gallery

IMG_7129 (resized).jpg
IMG_7128 (resized).jpg
IMG_3178 (resized).jpeg
IMG_1131 (resized).jpeg (© Nutty 5.0)
IMG_5287 (resized).jpeg
IMG_0220 (resized).jpeg
IMG_7122 (resized).jpg
IMG_7112 (resized).jpg
IMG_0803 (resized).jpeg
IMG_0802 (resized).jpeg
IMG_6921 (resized).jpg
IMG_6922 (resized).jpg
20240223_231438 (resized).jpg
20240223_231255 (resized).jpg
20240223_231332 (resized).jpg
20240223_231336 (resized).jpg

You're currently viewing posts by Pinsider Sciddleybop1980.
Click here to go back to viewing the entire thread.

#773 8 years ago

Been playing taxi this Christmas. I can justify it to the wife because it has Santa on it!!

1 month later
#805 8 years ago

I have a protector set. Can't remember where it came from. Possibly Marcos. Not that impressed as it doesn't sit proud of the original plastics!! So kinda pointless. I have a protector set on my whirlwind and that sits proud by a good 3mm

#810 8 years ago
Quoted from weaverj:

i got to play one today. very sweet game. unfortunately, he wanted $2k and it was like a 5 or a 6 out of 10.
one thing i noticed with this one, when you hit the left ramp or a ball comes out of drac's kickout, the ball would hit the glass on the way back down right before the metal catwalk. it's like there wasn't enough clearance for the ball on the right side of that orbit ramp. that's not normal, right?
hope i'm using terms that can be translated.

No that's not normal mate. Somethings definitely out of alignment

#819 8 years ago

my taxi occasionally blows the left side GI fuse on start up! Can't find any shorts and it's random.
Any clues ?

#821 8 years ago

Visually all bulbs are fine. Gi is all led except the pops.

1 month later
#882 8 years ago

Mine was a Lola, but since the restore (CPR playfield, back glass and new Roms) it's now a Marylin.

#886 8 years ago

I have to admit, I think mine is the same mate. Interested to hear others views

#895 8 years ago

Hi Eric. I'm from the UK so unfortunately can't buy but more to say, that's really not too much work for someone with the skills and knowledge. I'd certainly be looking to repair.
Taxi is a fairly rare beast over here and it would be a travesty to part it out with so little needing to be done. Pop bumper and flipper parts are generally going to be rebuilt as a matter of course anyway so that leaves display as the big expenditure. I'd bet you could beg, borrow or steal the other parts off here.

Good luck whatever you decide
Gaz

#907 8 years ago

Well if it's gone to the slaughtere!! I do need the ball launch wire form!! I'll pm ya Eric

#911 7 years ago

Oh in addition to my pm, do you have a relay board? The small one either on the back of the light board or at the bottom right corner of the playfield? I need one as on of mine is toast

1 month later
#949 7 years ago

Awesome indeed. This could answer a lot of people's prayers if CPR don't do another run

#961 7 years ago

Love the old pics. Thanks for posting

2 months later
#981 7 years ago

I'd be interested to hear this. I have a nice white original but I also have a very yellowed one with new decals ready to apply which I'd like to spruce up to sell

2 months later
#1039 7 years ago

Interesting. I may have to try the stronger cool too. Mine is a struggle also. I've tried new coils, full flipper rebuilds and switches. Next thing I was going to install were new flipper base plates as I have early Williams ones with the fixed end stops.

#1045 7 years ago
Quoted from joey__p__1966:

Thanks for the info . I believe I'm going to try the fl11629. It's just frustrating trying to start multiball and having the ball not make the ramp and going SDTM.
The kickout issue, might bend the rail a touch and put new screw hole in to change its direction. I'm pretty sure I resleeved everything , unless I missed that coil and it's just sluggish , In which case a new sleeve may help. I'll let you know what I do and the results.
Also, Sciddleybop, I have the new WPC baseplates and return springs, still have this issue.
Thanks again ,
JP

Great thanks mate. In that case I won't waste my time and effort swapping the base plates. New coil it is.

#1049 7 years ago

And if in future you need to disable it, you can do it in the settings. No need to cut wires!! I love the bell but I've had to disable it otherwise it wakes the kids up!!

2 months later
#1096 7 years ago

I had the same. There were a number of spacer washers on the hinge itself. I removed those and it dropped the height considerably. It still doesn't line up perfect. Although, I should add I have the CPR glass. Not an original Translite

1 month later
#1132 7 years ago
Quoted from Plumonium:

About the jackpot meter,
Mine is showing the jackopot value all the time. I thought it was supposed to be showing the bonus value as well some times. Mine doesn't.
Problem? Settings?

Mine doesn't either. Always thought it was supposed to. I wonder if it may be a rom revision

#1136 7 years ago

Now you mention it I have a Pinled display in mine!!

1 week later
#1144 7 years ago

No. Sounds like the balls having the sting taken out of its tail. Try and adjust the ramp where the wire form meets it. Mine got hung up there before.

I can normally pretty easily spin out to 1k and 5k.

They are finickity little buggers to set up right

9 months later
#1341 6 years ago
Quoted from RonSS:

Question on "Ride Again " light.
When should this light be on and what does it indicate?
Mine seems to come on a lot.

It’s the extra ball light. Comes on when.......you earn an extra ball

#1344 6 years ago
Quoted from RonSS:

Hmmm, that's what I figured.
So I've got an issue then. Time to start troubleshooting.
Thanks

Check closely and see if any other lamps are coming on when they shouldn’t.

It’s possible one of the lamps in the row has a bad diode or maybe even the lamp holder is incorrectly wiired (had it recently myself on wh20 and caused a whole host of lamp issues)

You can help eliminate batches of possible culprits by unplugging any large lamp pcbs under the pf. If the problem disappears whilst one of the pcb’s is unplugged, you have narrowed it down to a few.

Either that or you happen to earn a shed load of extra balls!!!!

3 months later
#1400 6 years ago

Lol. Yeah in a world where Gorbie shares a cab with Santa, who cares right!

But they should be just plain ol blue.

1 week later
#1405 6 years ago
Quoted from desertT1:

My ringer/bell hasn't worked since I got the game. Is there something specific I should be looking for? I'll take it apart once this tournament I'm hosting is over, but from the last time I was in there a visual inspection didn't show anything obvious like a broken wire or hammer fallen off the coil.

Without meaning to insult your intelligence, you can disable the knocker in the settings. It isn’t disabled is it??

1 year later
#1507 4 years ago

CPR released a mirrored glass about 5 years ago. I have one. The colours aren’t great on it though. Almost looks a little “soft focus” if that makes sense. Still nice though. And as I had a CPR playfield I needed a Marylin glass to match the pf.

7 months later
#1578 4 years ago

It’s creeping up in value because..............
It’s freakin awesome man

1 month later
#1663 4 years ago

It’s a pita to setup. A big part of it is making sure the plunger strikes dead centre of the ball. Mine will sometimes spin round the clock twice, more often a full plunge will eek out to 100k. I always try and plunge for 20k and a passenger anyway so it doesn’t bother me too much.

6 months later
#2123 3 years ago
Quoted from Barr993:

Translite mirror question: my Taxi came with the mirror double side taped to the gray foam on the light board but there were also signs of old double sided tape to the translite.
Which method is correct?

It should stick to the back box light board on the piece of wood sticking out. Or if you have a cpr mirrored jobby then you can bin it

1 week later
#2154 3 years ago
Quoted from BJM-Maxx:

What is supposed to be on the backglass Taxi meter display? I was under the impression that it shows the jack pot value between balls. During play I thought it was supposed to show the bonus racking up slowly, like a taxi fare. Mine stubbornly just shows the jackpot value 100% of the time. I am using updated ROMs bought from someone on Pinside and the game plays normally from what I can tell except for this one aspect.

Which displays do you have? If you have new pin led displays, the jackpot counter won’t show the meter bonus racking up. If you read back on this thread, there is work around to combat this but involves cutting diodes on the board or something like that. Mine has new displays and won’t show it either. Tempted to find an original glass display to have it back

#2156 3 years ago
Quoted from BJM-Maxx:

Wow, I was totally unaware of that and yes I have a new led display. I will try to find it in this thread.
Edit: Found the ribbon cable, moved it over and now I have the rolling taxi fare display as it is supposed to be.

Awesome mate. And I didn’t know about the ribbon cable thing!!! What do I need to do.

2 weeks later
#2200 3 years ago

I personally think Taxi looks really good with black legs, rails and lockdown bar. I’m not normally one for powder coat but like that combo

1 week later
#2212 3 years ago

I would start at the relay board under the playfield. It’s a common problematic area for gi.

4 weeks later
#2246 3 years ago
Quoted from philsublime:

Hi. I bought a Taxi a few months ago. It was in bad shape, but I cleaned it inside out and repaired/redid all the mechs and some of the switches. It works pretty good and looks pretty nice too. What bugs me is the translite. It looks ok, but the mirror zone looks like shit. First, there's the scratched translite. No way to remove those scratches. Also I would have to be very careful not to damage the fragile part of the translite. Also, the mirror is heavily scratched. I was thinking about getting a nice CPR backglass. But then I read there's lots of issues. Colors and details not right and the glass too thick. But it seems it's not the same with every game. Does anyone have experience with the Taxi CPR backglass?
Thanks for the help!

I have the cpr backglass. I got it purely so the collar matched the cuffs as I only had a Lola translite but a Marylin playfield.
It’s not the best with its soft focus appearance and washed out colours and the mirroring isn’t great. But that said it’s better than nothing and you’d only really notice the difference if you had a original side by side. If your translite is trashed, go for it or try and source a translite. Not sure how easy that is.

5 months later
#2446 2 years ago

My cpr glass is also as everyone else describes, I always describe it as being in soft focus. It was the first batch a few years ago. It’s either that or have my Lola translite with Marylin playfield. Not sure what’s worse to be fair

11 months later
#2819 2 years ago
Quoted from monkfe:

trying to decide on a color for my Taxi rehag ( for the rails and such) Can you that have done your machines over post some Taxi porn for me ...thanks...

Black in my opinion looks great

1 week later
#2822 1 year ago
Quoted from monkfe:

What have you guys done to remove the yellowing on the topper? I've had mine sitting in hydrogen peroxide for the last two days in the sun and it does't seem to have done anything.

Not done it personally but I’ve heard of good results by biting the bullet and removing the decal and spraying the topper white and putting a new decal on.

3 weeks later
#2927 1 year ago

Yours was a Lola game but has a Marylin overlay. Which roms does it have (does it say Lola on the display when you collect her)

2 months later
#3010 1 year ago
Quoted from Eddy_BE:

What is the use of this small post? If any
[quoted image]

If an air ball sent it rolling down the side of the rail it would hit that and drop into the shooter lane instead of wedging between the glass and getting stuck……. I think

1 month later
#3036 1 year ago

The suspense is killing us Rob

3 weeks later
#3053 1 year ago
Quoted from RCW:What’s the best guess at the make and model of the car on the side of Taxi’s cabinet?

A 56 Chevy Bel Air?? Coming from a Brit I’d take that with a pinch of salt.

6 months later
#3310 12 months ago
Quoted from The_Great_Man:

I am sure this has been fully covered. My machine has Lola on the playfield and backglass but the displays show Marilyn. Is the only way to fix this by getting an upgraded ROM.

Hey mate. Yes it’s a rom swap. I had to do it to mine.

7 months later
#3429 4 months ago

I upgraded my flippers yesterday to later Wpc hardware. Holy crap. What a difference. Should’ve done it years ago. Left ramps a dream now. I recommend it highly.

#3432 4 months ago
Quoted from HighSpeed1:

What exactly did you replace, part#'s?

So I replaced the base plates, end stops, and linkages and springs. As mentioned above it could just be the springs which make the difference. I can’t comment on that. The newer linkages have the metal tab on them to accommodate the spring and I think you’ll need the Wpc eos bracket as well to attach the spring to.

#3434 4 months ago
Quoted from slochar:

It's more because you just replaced all the parts that were worn with new ones.

nah, they were all new and fresh after a restore. The new parts made a big difference

Promoted items from the Pinside Marketplace
4,000 (OBO)
Machine - For Sale
Bay Shore, NY
From: $ 649.95
Lighting - Led
Pin Stadium Pinball Mods
Led
$ 399.95
Lighting - Led
Pin Stadium Pinball Mods
Led

You're currently viewing posts by Pinsider Sciddleybop1980.
Click here to go back to viewing the entire thread.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/taxi-club-members-only?tu=Sciddleybop1980 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.