entire left side GI is out on the TOTAN i just purchased. both connectors J105 and J106 on the power driver board look good in the sense that they are not burned. i replaced the connector with the new type terminals to ensure a good connection. the right GI works as it should. i can do some testing but in all transparency really just need good guidance on what exactly to check for

that is where i will start. i thought all the fuses checked good but i will pull them all out and check with a meter when i get home from work tonight

Figured it out!! The white wire with orange stripe had pulled out of the connector that plugs into the transformer. Popped the pin out and recrimped and good as new