Tales from the Crypt
Data East, 1993Hey, guys,
Im new to working on data east games not having working components, trying to figure out where to start... so far I have:
a new rotten dog power supply, so everything is booting and starting a game
and checked fuses on the PBB board, I looked through the schematic and cannot find exactly where the fuse is that supports these 3 coils
any help on where to go from here?
Thanks all!
all fuses on the flipper boards, pbb board, and power board are good, i pulled them all and tested them
check if the corresponding coils work in test mode. Check to see if switches work in switch test mode. Check that wires are soldered on the lugs, and trace the wires back to see if there are any breaks in the wires. Re-seat the connectors on the boards as well.
All the fuses on the flipper board were good, tested voltage is on the 50 V lines on the Flipboard and was getting no voltage, traced down to F5 on the PBB board, Re tested the f5 fuse, it was bad... sometimes it’s just the simple things...
Thanks a lot guys!
The f5 fuse was hidden under a mass of wires, guess I missed it when I was testing things
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/tales-from-the-crypt-flippers-and-shooter-dead and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Marysville, OH