Quoted from jtcentral:I have a TAF that I am converting to LED. All lights where working prior to upgrade. After switching out I now have Column 1 lighting up Column 2. Also anytime you get below Row 3 in column 1 or 2 you get the Row 7 LED on for that column. I have tested all diodes and nothing is reversed, columns are not shorted, and I am getting good pulse on all the lines. Can a bad LED bulb cause all this nonsense?
There is a anti-ghosting game ROM which someone developed for TAF. I am not sure where to get it, but others may chime in.
I had LED's installed in the mansion inserts in my TAF and multiple insert lights would illuminate when one was lit. At that time someone told my about the anti-ghosting game ROM which is supposed to prevent this, but I never went that route and I reverted back to incandescent bulbs for the insert lamps and everything worked as expected.
Gord
Rancho Cucamonga, CA
Vancouver, BC
