This is a machine I just finished a playfield swap on. I suppose I should add that. But, I made a GRAVE mistake in the job. I did not fix the pinball machine before I did the swap. It came to me with a whole SLEW of burnt coils, broken subways and was just generally in HORRIBLE shape. I have since, replaced the playfield, a bunch of coils, all the stainless assemblies have been replaced or rewelded. MPU has been replaced, the SDB has been gone through completely.
But in hindsight, I really should have fixed it before the PF swap, so I could know if this was an issue I introduced or not.
I will further check the switches when I get back to the shop later. In coil test, all the pop bumpers fire the bottom right pop as well. As does the left sling. Everything else seems to work fine. But none of the pop bumper switches register in switch test. As far as I know, all others do.