Addams Family, The
Bally, 1992You're currently viewing posts by Pinsider terryb.
Click here to go back to viewing the entire thread.
Won't be as fancy as zaza's drawings, but here you go. The text below the schematic explains what reading you should see. Note: This is a generic high voltage solenoid circuit, use the manual to identify the specific components.
Put your probe on point A and then trigger the solenoid. The signal should go from high to low. The reverse will happen at point B when the solenoid is triggered.
You can always compare to another circuit to validate your methodology.
The WPC manuals don't include full schematics. You can download them here: http://arcarc.xmission.com/Pinball/PDF%20Pinball%20Misc/
You're currently viewing posts by Pinsider terryb.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/taf-looking-for-help-with-thing?tu=terryb and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Banning, CA
Auckland, NZ
Vancouver, BC