Addams Family, The
Bally, 1992I just picked up my first Addams Family yesterday . It was missing the MPU so I can guess what was wrong with it when it was
put away . When I looked under the playfield I saw a small board close to the lower flippers that had a problem . Looking in the manual I see it listed as A15139 High Power . I think it is toast . Does someone sell this ??
thanks Scott
Unless it caught on fire it should be easy to fix, all the parts that can go bad is three 1N4004 diodes, three 220 ohm 1/2W resistors, and three TIP36C transistors.
It sure looks a lot like this one for $39.95... http://www.marcospecialties.com/pinball-parts/520-5235-03
You can buy all the parts (minus headers and heatsinks) for $6.18+shipping http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=3dc750d46f
EDIT: The circuit board header keys on the one linked from Marco do not match the TAF diagrams.
Here is a photo of the backside of the board . It looks like one of the heatsinks had a problem and it took out the traces
on the back . Then some got out their soldering iron .... Is this board only for a Addams ? When I try to search for it using the part number A-15139 I do not
get a hit . Anyone have a good used one ?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/taf-high-power-question and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Chattanooga, TN
Vancouver, BC