Ball is getting stuck after draining. Only gets kicked over when machine goes into search mode.
Switch seems good. Replaced diode and all wires seem to be solid.
Am I missing something, or should I try a new switch next?
You're currently viewing posts by Pinsider Parzival.
Click here to go back to viewing the entire thread.
Ball is getting stuck after draining. Only gets kicked over when machine goes into search mode.
Switch seems good. Replaced diode and all wires seem to be solid.
Am I missing something, or should I try a new switch next?
In troubleshooting this more, I have found other switches in row 8 not working (Upper Swamp Million (48), Right Ramp Exit (58), and Left Flipper 1 (78)). However, Upper Left Loop (38) and Vault (68) both still work.
I traced the wires back, and didn't find any breaks.
What else am I missing?
Thanks Zaza!
Found a bad connection up by the vault. That seemed to fix most of the switches.
However, switch 58 is still not working. Bigger issue is that outhole is working during test mode, but not in a game. I replaced the outhole switch, could I have a connection backwards?
Switch 58 still isn't working! Resoldered the surrounding switches in matrix, but still nothing.
I'm pretty sure 58 worked until the wire by the vault came loose and was reconnected. Before I did that, I changed a couple switches, but everything else is working.
This is the last error on the machine, and I want that credit dot gone! Any suggestions on where to focus would be appreciated!
You're currently viewing posts by Pinsider Parzival.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/taf-ball-kicker-issue?tu=Parzival and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.