Hi Guys!

I am a new T3 owner. I bought the machine about 3 weeks ago. The machine was in very good condition but I changed/ upgraded some things.
- New Legs/Bolts/Silicone Leg Leveler
- Mirrors side blades
- New Brite Illuminated Flipper Button set
- Black Button-Guard Side Rails For Stern
- Cleaned the cabinet with Crown Spray Power Cleaner
- Nem T3 ( Skynet) topper
- Stern bubble level ( original was lost )
- Original manual ( and T3 keychain

The Previous Owner changed the DMD screen, speaker decal etc... and the bulbs but not all....
My questions is these:
- Where can I buy small size #555 6,3V bulbs what is fitting in the machine ( the Comet is to large )
- Where can I buy small size #89 6,3V bulbs waht is fitting in the machine
- Where can I buy small size #905 6,3V bulbs waht is fitting in the machine

If you upgraded the T3 machine with LED pleas write me.

When is the pinball is complete I uploaded pictures.

Thanks.

One more question:
In the black box 4 LED bulbs isnt work. The bulbs are good just the lights are very very weak.
Any idea?

Thx

20190623_171026 (resized).jpg

In these 4 LED bulbs there is only 3,5V ( not 6V )
That's why weak the lights power
What can i do?

Thanks

Hi,
I cleaned but the problem is same. Need I replace the all 4 socket? These 4 bulbs are in one line. Why is only 3.5V everywhere? Is the new socket will be help?

Thanks.

I measure the contacts on the socket. Not from inside of the socket. But I check again.

Thanks

Ok I have a biggest problem. I just moved a little bit the cables and I checked sockets and just started the RPG mode....I turned off the machine. And now the 4 bulbs are working but the others not!!! If I start the RPG mode the all bulbs are lighting a little bit ( but the 4 bulbs full lighting ofcourse ) What is the problem? The relay? The cables? Or what?

Thanks.

20190630_101504 (resized).jpg

20190630_105746 (resized).jpg

20190630_105750 (resized).jpg

Hi,
Ok I will check everything at weekend.
Thanks

Hi

I bought a Terminator topper ( from tilttopper.com ) and I dont know install the cable. Any idea? ( on board? Where? )
I have WPC/WPC95 MM-POWER -ADAPTER-WPC

Thanks

20190705_175756 (resized).jpg

20190705_175744 (resized).jpg

20190705_175619 (resized).jpg

20190705_182433 (resized).jpg

I connect the harness to the 12 V plug below the right flipper button. Its working but I also use this for lighting buttons. Can I connected on the board? Or I need a 12v power splitter? ( link?)

The other problem: If I connected the topper there is a loud noise (Buzz) from the speaker. (???)

Thanks

Finally a found the problem! The bulbs does not working because the plug is broken. Do somebody know what is the exact name of this and where can I buy? I think the socket is good.

Thanks!

20190705_214101 (resized).jpg

20190705_214106 (resized).jpg

Hi Guys!
Finally I finished the T3 Project!

New Legs, Bolt, Leg Leveler, Silicone Leg Leveler Casters...
New Stern Bubble Level ( is the original lost?! )
FULL LED Upgrade! ( playfield, blackbox, etc.. )
Full clean the playfield, cabinet
Full rubber change ( black )
New Stern Glass playfield
New Stern Black Button-Guard Side Rails
BriteButtons Illuminated ( white )
NVRAM Battery Eliminator ( 6264 )
New Balls 1-1/16 in ( Standard )
New Plug AC 110 volt
2 extra figure T-X and T-800 McFarlane
Mirror Blades
Terminator pinball topper ( flashing eyes, separate adjustable light and sound modules )
Original Pinball Flyer (2)
Original Stern T3 Manual
Fixed all small problems..

Hi Guys!
Finally I finished the T3 Project!

New Legs, Bolt, Leg Leveler, Silicone Leg Leveler Casters...
New Stern Bubble Level ( is the original lost?! )
FULL LED Upgrade! ( playfield, blackbox, etc.. )
Full clean the playfield, cabinet
Full rubber change ( black )
New Stern Glass playfield
New Stern Black Button-Guard Side Rails
BriteButtons Illuminated ( white )
NVRAM Battery Eliminator ( 6264 )
New Balls 1-1/16 in ( Standard )
New Plug AC 110 volt
2 extra figures on playfied T-X , T-800 ( McFarlane )
Terminator pinball topper ( flashing eyes, separate adjustable light and sound modules )
Original Pinball Flyer (2)
Original Stern T3 Manual
Fixed all small problems..
20190728_094639.jpg20190727_164727.jpg20190727_164719.jpg20190727_182312.jpg20190727_182336.jpg20190727_184441.jpg20190727_164733.jpg20190727_164913.jpg20190727_164657.jpg20190727_165047.jpg20190727_214120.jpg20190727_214233.jpg20190727_214213.jpg20190727_214326.jpg20190727_214728.jpg20190727_215236.jpg20190727_215443.jpg20190727_220134.jpg20190727_214125.jpg

This is really cool

Thanks. The Bright Buttons are really looks great. ( https://www.pinballlife.com/britebuttons-illuminated-flipper-button-set-for-stern-white-star-sam-system-machines.html )

Could you upload pictures about your machine?

little upgrade

20191001_104832 (resized).jpg

20191001_104815 (resized).jpg

20191001_104845 (resized).jpg

Hi Guys!

I bought these parts for my pinball machine.
How Can I change these? No screws...this is fix

Thanks

20191015_120536 (resized).jpg

20191015_120552 (resized).jpg

20191015_120601 (resized).jpg

Yes pop-rivet....I don't know how I change..but Im thinking

I ordered this from Europe ( https://www.pinball.center/en/ ) and my friend brought it to me.

Thanks

Hi Guys,

I need a help. I replaced the flip coils ( both )coil sleeves, coil stop etc... and now buzzing the both flip. I replaced back the old coil etc... and the buzzing noise is same. I tried every combination old coil, new coil... What can I do? The coil stop is the old because the new ( from pinball life ) does not fitting.

How to put it back?

Thanks

20191108_205402 (resized).jpg

20191108_205343 (resized).jpg

20191108_204634 (resized).jpg

20191108_205506 (resized).jpg

20191108_205456 (resized).jpg

20191108_205544 (resized).jpg

Tomorrow I make a video. The buzzing is not constant, just when energized.
Do you know make picture about your Coils? I uploaded the pictures but I dont know how I put back.
I try to join the facebook group

Thanks

I replaced back the old coil, coil sleeves, coil stop ect...and the buzzing noise is same.