Hello all. I started on a Terminator 2 playfield restoration. As i found out on the forum that it is best if there is a layer of clear over the plastic inserts and since my decals over the inserts were severe damaged after the removal of 3 layers of mylar, I took out all inserts. I even bought an insert set to move on with the job. The problem is ghst I found out that I have a set if peel and stick decals and not the much needed waterslide decals. I scan them but the colours are faded and to avoid a month of picture editing I am asking if someone have a file with a good scan? I already bought transparent waterslide decals I only need the file. Thank you. Also on the file that I have the decals coresponding to both loops the ones at the bottom that have part of the robot are not complete. Hopefuly someone have scaned the playfield before ripping those out. Sorry, it is my first try of playfield clearcoat and obviously I made some mistakes.