Seems like my T2 Cannon / Gun motor seems to be slower / louder than some I've seen elsewhere and on YouTube.

Any way to remedy this or is it just a straight up replacement motor? It works, it just seems that it may be starting to show signs of its age.

Thanks gang. Going to grab some lube...er... I mean grease and steel wool to see if that's the case. Will also take your advice into consideration mdclips if it didn't improve, could also be the motor I suppose if there is no improvement. But from the sound of it, that shaft needs a good cleaning.

And let's face it, dirty shafts get you nowhere.

Best way to take off that C clip btw? I feel like Im going to break it if I tug on it with needle nose pliers.

*Update* Crud was keeping the C clip barely there apparently. Got it off.

Works a lot better now. Took it all off, cleaned everything and greased it up, functions like a new cannon. Thanks gang for the help.

I was too but it's worth the effort. Just be extra careful, is all. Everything works great now.