Something fell off my cabinet flipper switch (not the switch under the playfield). I did some looking around and decided to order c.1m500vr from Marco to replace it, but before I install it I would like to confirm it is the correct part (or close enough). I removed the switch on the other side to see what it said on that capacitor. Its hard to read, but I think it says .1Z 500V. It is a bit burnt up as well and has a chunk missing so I don't know if anything else used to be written there. Can someone confirm that the c.m500vr which is a .1uF 500v disc capacitor will work here, or can you tell me which part to order. Thanks.