More coming

Prices are:

Painted - $90 shipped in North America

Chromed - $70 shipped in North America

They're all blank at the moment, so of the 10 I'll paint them as ordered.

Worldwide shipping is available but I can't guarantee how much shipping would be (some places are upwards of $40)

If shipping within North America, please send payment to [email protected] with "T2 Mod - color" or "T2 Mod - chrome" in the notes section

If shipping worldwide, PM me and we'll figure out shipping costs.

- B

-3.jpg -4.jpg

5 sold, 5 left

Hey all, these are sold out 'till further notice (should have more before the New Year)

Thanks!!

PS. Orders have officially shipped.. thanks for the overwhelming response

Thanks all.. there was a delay in getting the chrome versions out, so I appreciate your patience!!

lol sorry about that, they're hand-painted.. as you said though, from the angle you're playing you can't really see the face.

Also those of you having trouble installing the left nut, have you tried it without the metal plate being there?

Worst case scenario, just use one of these

http://www.pinballlife.com/index.php?p=product&id=51

Chrome versions shipped late, sorry fellas.. I wasn't happy with the chrome I was getting from a new spray I bought. Managed to locate the old stuff I was using.

Sorry folks, I was out of the pinball world there for a bit. I'll answer PM's right away on these.

- B

See here:

http://pinside.com/pinball/forum/topic/t-1000-mod-for-t2/page/2

For all interested, I'll have a limited run of 10 of these available by the end of the weekend.

If you want one, now's the time.. they take forever to make. I may do one more lot before Christmas but I have some other obligations first (and I need to come up with more shooter ideas!)

Prices are:

Painted - $90 shipped in North America

Chromed - $70 shipped in North America

They're all blank at the moment, so of the 10 I'll paint them as ordered.

Worldwide shipping is available but I can't guarantee how much shipping would be (some places are upwards of $40)

If shipping within North America, please send payment to [email protected] with "T2 Mod - color" or "T2 Mod - chrome" in the notes section and I'll get it out this weekend.

If shipping worldwide, PM me and we'll figure out shipping costs.

- B

all gone, thanks all.

Hey gang, I got most of them out early last week. I had a bit of a hiccup in the painting process of this batch but it's all sorted out now. Everyone should be receiving theirs this week

and yes, I'm still making them. I've already started round 2 (I make them in batches of 10)

Thanks to all for their interest (and patience)

- Brock

Hopefully everyone is getting theirs by now. If not, let me know

Also I've got 10 more cast so should be taking more orders soon.

- B

PMded

Alright gang, round 2 is ready for paint! Send payment according to the first post and I'll paint them to order.

Please keep in mind a ~2 week delivery

Thanks all

Sorry, i should clarify.. i didn't want to take any orders for round two until i had them ready to paint. Now that they're ready, it's wide open for orders. . The extra time needed is to paint the parts depending on who wants chrome or color

Keep 'em coming! Plenty left.

Prices are:

Painted - $90 shipped in North America

Chromed - $70 shipped in North America

They're all blank at the moment, so of the 10 I'll paint them as ordered.

Worldwide shipping is available but I can't guarantee how much shipping would be (some places are upwards of $40)

If shipping within North America, please send payment to [email protected] with "T2 Mod - color" or "T2 Mod - chrome" in the notes section

If shipping worldwide, PM me and we'll figure out shipping costs. The problem is, once we get into tracking numbers for world-wide shipping it can cost upwards of $50-$60 which is ridiculous! Regular air-mail isn't too bad at ~$25 but then you take your chances with zero tracking, zero insurance.

Please hold






...

5 pcs left.

But of course! I'll deliver yours personally so I can fondle your pins.

2 left. I'll do more in the new year.

1 left!!

SOLD OUT!!

I wish I could keep up with demand but they take a long time to paint

Not to worry, everyone that wants one will get one eventually.

Round two is still in the works, production was hindered due to the holidays but I'm back at it full swing.

Hey gang, hope everyone had a wonderful Christmas (or other) and a Happy New Year!

Round two is shaping up nicely and I'll be getting a bunch of them out this weekend.

I'll chime in again when I'm ready to take orders for Round 3. Again, if you need to reach me your best bet is to email at [email protected] as I get the emails on my phone. It's our busy season at my day job and what not, so I'm not on here all that often.

Off to check my in-box.

- B

Some more pics here:

http://s420.photobucket.com/user/mslave/slideshow/T2%20Mods

The last pieces of round 2 are shipping this weekend, thanks to all for your patience.

- Brock

Alright gang. Round 2 is out the door.. round 3 is ready to go (see pic). Got a bit of a head start on this one.

See page 1 for ordering instructions.

20140120_230842.jpg

*bump* for the day crowd

Bump

Still some left.

No problem bud, I'll set one aside for you.

Also I want to thank everyone for their interest and support with these. It's nice to see all the hard work is appreciated Heck, even the Ritchie bros had nice things to say about it!

*bump*

Still a few left. This'll be the last batch for a bit, need to finish up other mods and come up with a few new ones.

- B

Does it involve a coffin and a certain blood sucker of the Bram Stoker variety?

up

Nope, I've got a few "blanks" in stock that I paint to order. PM sent.

Apologies, Daniel, I'm just getting to this now. I was in a car accident recently and a few things got lost in the whirlwind of all that. I'll send out the replacement this weekend, please hang tight.

- B

I'm here! I'm here!

I'll get some PM's out and clear this mess up

In the meantime guys, if you need to reach me please email me at sales_AT_pinballcustoms.com -- it's definitely the best way to reach me!

- B

For those of you who've been incredibly patient, I'm throwing in a little something extra.

hey fellas, will get to PM's momentarily. I'm all out. I'm still making them, but a new batch is a little ways off yet 'till I catch up on other orders. I'll post back when more are ready.

- B

Some professionally printed instruction cards

Seems like there's demand for these again, I'll get another run going.

- B

Yes, current run has already started shipping but I've still got a few left!

https://pinside.com/pinball/forum/topic/terminator-2-t1000-mod-round-5

Hey Ed, yours is shipping this week.