Hi,

I have extracted these questions from another topic as they are more specific.

On a williams Comet, a tricky stuff has been added that I d like to remove. I try to restore a few original connections, between the cabinet and the boards.

1. Where does the start button connects to ?
2. Where do the wires MPU 1J10-3, PS 3J3-8, 3J6-14, 3J6-3 go ?

I read the manuel which does not give a clear description

Thanks

Great wayout,

I had not made the link between credit button and start button, so I have not found the start button on the switch matrix. Indeed it is the credit button.

thanks a lot for your time. It is really helpful

hi,

The switch matrix connection with the coin door and "Credit button" are ok. There was a mix on the door between wires, The wiring on the left coin chute is restored, and I have shortcut the 2 others. Check is ok (slam tilt as well).

For the power board wiring, I can remove the additional wires that were used to feed the tricky board.

Now back to the other problems of restart of the machine.

Thanks again wayout