I recently got a Gottlieb silver slugger, i just noticed that I'm missing the cable that connects to the driver board, it's a white cable with a 8 pin molex connector A3J7, and I believe it runs to the small board behind the power supply. This cable seems to be missing completely. How do I replace it? Are there people who remake these if so I'd like to buy one.
Quoted from TwoHeartedMale:This one.[quoted image]
Check inside the cabinet. I think that one may be from the playfield.
Quoted from ForceFlow:Check inside the cabinet. I think that one may be from the playfield.
That's the first thing I checked
Quoted from TwoHeartedMale:That's the first thing I checked
Is there a matching empty connector on the transformer's PCB?
Here's the connector parts if you need to make a cable: https://www.greatplainselectronics.com/categories.asp?cat=55
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/system-3-molex-cable-?hl=pb456 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Ann Arbor, MI