So I tried to do the MOSFET mod to my BK2K lamp matrix using an IFR9Z34N MOSFET. I tried a MOSFET on Q87 and a zero ohm jumper on R134 as a test and about 4 lights were stuck on. Does anyone know what I did wrong?
Thank you for any help.
You're currently viewing posts by Pinsider BriPin.
Click here to go back to viewing the entire thread.
Afternoon bump! I forgot to mention that I am using LED's and am not sure if that would cause an issue. Thanks.
Thanks for the reply Chris. After really looking at the schematic, which I'm not at all proficient at, I realized I was changing out the lamp row section and not the lamp column section. Once I realize that, I completed the mod and everything's working great. Thanks again for your input.
Quoted from Patofnaud:I've never done it to Sys 11's as I have not seen any data on temperature drop.
I haven't seen data either but a simple touch of that row of hot resistors is all the data you need!
You're currently viewing posts by Pinsider BriPin.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/system-11bk2k-mosfet-mod?tu=BriPin and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.