Quoted from fixintoplay:Awesome, thanks! I did notice on the reverse (solder) side of the CPU, there are (-) symbols etched on one side of each of the 8 solder holes for that row of caps, so I was being cautious.
I do have another question about the C60 electrolytic axial which I am also replacing, but I have a radial of the same specs. Would that be an OK substitute, and does the "0" gray band indicate the pos+ pin? Thanks again!
[quoted image]
The grey band with the "0" is actually a negative sign. So that leg is the negative and the other leg (which should be slightly longer) is positive.